PLASTOMATE- SP
Mortar Plasticizer cum Water Proof Powder

Introduction

PLASTOMATE- SP is a concentrated ready to use powder, which is to be dry mixed with cement & sand mortar. The product acts as mortar placticizer cum waterproofing agent due to its unique formulation. As a plasticizer for mortar it prolongs the workability of the mortar & acts a waterproof additive also. PLASTOMATE- SP introduces air in to the mortar in form of fine & evenly distributed bubbles. This air entairement provides workability & premature stiffing of the mortar. Capillary channels are also reduced in the bubbles resulting in to reduced permeability. This action also increases the yield of by 8 to 10 % resulting in cost saving by 10 to 15% in total.

AREAS OF USAGE: Plastering and Masonary mortar.

APPLICABLE STANDARD: IS 2645 Part 1 & BS 4887

PHYSICAL PROPERTIES: Powder form.
.

Benefits

1. Prolonged workability without addition of extra water gives better plasters.
2. Smooth material ensures easier spreading & better adjustment of brick & blocks.
3. Reduced mortar dropping due to better adhesion to the surface resulting in faster work & cement saving.
4. Smooth material ensures faster work & reduced labour cost.
5. Reduced hair cracks in plaster.
6. Reduced permeability ensures waterproof plaster.
7. Above benefits results in to 10 to 15% saving in plaster cost.
.

Application Method

Dry mix with sand cement. Mix thoroughly and then add water..

Packing and Coverage

PACKING: 200gms pouch
COVERAGE: 200Gms per bag of cement to be dry mix.
.

Shelf Life

1Year in sealed pack.
.

IN SERVICE OF CIVIL ENGINEERING, PRODUCTS FOR TODAY & TOMORROW.

Pyramid Chemicals (P) Ltd:
304 Vihav Excelus, Nr. Bright day CBSE school, Bhayli road, Vadodara - 391410.
Cell: +91-982 504 4798, +91-997 890 7140 | Email: info@pyramidchem.com | Web: pyramidchem.com

For specialty products consult the authorized representative of the company before its usage & application. Any failures resulting prior to proper guidance from our representative or application carried out by the other applicators that are not authorized by us, will not be our responsibility.