GROUT- P
Non-Shrink, High Strength Polymer Grouts

Introduction

GROUT P is a two-pack cementious non-shrink polymer grout. The product is specially designed to get twin advantages of polymer liquid with low viscosity & traditional free flow high strength cementious grout. The product has excellent flow properly with non-shrink property after placing. Best suited for chemical industry as the addition of polymer liquid gives good resistive property to the grout.

APPLICABLE STANDARD: ASTM C 1107

PHYSICAL PROPERTIES:
(1) Yeild per pack-13.8 ltr (25 Kg + 5 Ltr).
(2) Free expansion-0.9 to 1.5% by volume.
(3) Typical strength development 600Kg/cm2 at 28 days.
(4) Pourable life: 20 Min at 30°C.
(5) Suitable for width upto 50mm.
(6). Density: 2230 kg/m3

Typical strength development chart.

24 hours 160 Kg/cm2
3 Days 320 Kg/cm2
7 Days 480 Kg/cm2
28 days 600 Kg/cm2

Benefits

1. Attain high & easy strength about 600 at 28 days.
2. Addition of polymer liquid ensures excellent adhesion with the surfaces, can be used in mortar or flowable consistency.
3. Suited for heavy-duty grout for machinery, tracks & construction joints.
4. Traditional properly grout of being non-shrink with positive expansion.
.

Application Guidelines

1. The substrate should be sound clean & free from contamination. Concrete & other mineral surfaces should be carefully pre - washed & all surfaces should be carefully pre-wetted & all surplus water removed, prior to the application of Grout-45.
2. Use oil free compressed air to blow out pot holes etc as necessary, ensure base plates, bolts etc are clean & free fro oil, grease & paints etc. set & align equipments if shield are to be removed after the grout has set than lightly grease them to facilitate easy removal.
3. The Grout 45 should be mixed with correct amount of water preferably by mechanical means for minimum 3 minutes. Do not mix more material that can be used in 20 minutes. The powder should never be poured in to still water.
4. The fluid grout should be poured from one end only. Ensure that air disploed by the fluid grout is escape when caring out base plate grouting ensure sufficient grout head of pressure.

.

Packing and Coverage

PACKING: 25 kG. Powder + 4 litre Liquid
.

Shelf Life

6 to 8 months when stored in factory sealed pack in dry & sealed condition. Refer grout application guide for application details.
.

IN SERVICE OF CIVIL ENGINEERING, PRODUCTS FOR TODAY & TOMORROW.

Pyramid Chemicals (P) Ltd:
304 Vihav Excelus, Nr. Bright day CBSE school, Bhayli road, Vadodara - 391410.
Cell: +91-982 504 4798, +91-997 890 7140 | Email: info@pyramidchem.com | Web: pyramidchem.com

For specialty products consult the authorized representative of the company before its usage & application. Any failures resulting prior to proper guidance from our representative or application carried out by the other applicators that are not authorized by us, will not be our responsibility.