CONBOND
SBN
Acrylic Polymer Modifier
Introduction
CONBOND
SBN is an acrylic based polymer modified cementitious coating system
when mixed with cement provides a mortar with better adhesive properties,
Impact resistance, Flexural Strength and thin section fragility
when Compared to ordinary cement mortar. It is also UV resistance
and fiexible having good vapour permeability adheres excellently
to roof and concrete,
brick, asphalt, timber, asbestos, etc. In addition it is used with
varying amounts of silica/Quartz sand which produces water proofing
coating and rendering to prevent ingress of water.
CONBOND SBN can also be injetced into concrete / rock structures
in the form of cement slurry. It is also used for con-crete
repair and bonding agent for old to new concrete.
CONBOND SBN is a single component water-proofing system also
work as bonding agent and repair- mass-in fill and non-shrink polymer
cement grout system.
APPLICABLE STANDARDS: ASTM 1059 TYPE II
ADVANTAGES
1. Excellent bonding properties
2. Allows concrete to breath
3. Increased flexibility
4. Excellent water proofing properties
5. Highy ultra-Violet and Ozone resistance
6. Resistance to abrasion, crack and chemical attack
7. Non-toxic, Non- flamabble, Non-corrosive
8. Easy to apply
9. Impact resistance
10. Increased flexural strength
PURPOSE: To be used as an admixture for cementitious system.
To repair concrete as patching mortar to be used as water proof
and damp proof coating
DOSAGE: CONBOND SBN has a coverage rate of 0.65 to 0.70 Kg/m2
PACKING: 5,20,50,100 and 210 litre drums.
AREAS
OF USAGE:
1. Water proofing of flat roof
2. Terrace garden water proofing
3. Damp proofing for external & intenal Surfaces
4. Water tank, Basements
5. Bridges, Retaning walls.
6. Crack sealing
Technical Data
Form
|
Liquid |
Colour |
White |
S.P.
gravity |
1.02 |
pH |
7.5±1 |
Chloride |
Nil |
METHOD
OF USE
Surface should be sound clean and free from oil, grease, dirt /
dusts and other surface contaminants. Mortar polymer composite can
be applied by trowel and waterproof coating by brush/roller.
STORAGE:
CONBOND SBN has a storage life of one year if kept unopned.
HANDLING
PRECAUTIONS: Avoid contact with skin and eyes wash off with
clean water use gloves for protection.
.
|