MOULDRELEASE - (E)
EMULSIFIED MOULD RELEASE CHEMICAL

Introduction

Mould Release E is latest mould release agent with concentrated & emulsified chemical for work mould release agent based omn mineral oil, when mixed with water at 1:15 dilution it produces a thin film of stable release agent. Mould release (E) has an outstanding releasing properties & advantage over conventional oil. It may react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, which enables easy strapping from the hardened concrete. Mould release is an internationally used material & has an outstanding record of performance.
.

Benefits

1) Economical mould release agent with environment friendly product.
2) Non- staining ensures minimized cleaning of shutters for reuse.
3) Mould release (E) suitable for all types of form works & all types of moulds.
4) Increased mould life to due easy deshuttering.
5) Gives astheic look to the concrete surface, when exposed aggregate finish is required.
6) Can be used with steam curing also.
7) Ready to use
. .

Application Guidelines

1) Clean the mould before application; no lumps dirt should be there on the surface.
2) Apply mould release- (E) by cloth sponge or brush.
3) Only one coat is sufficient.
.

Packing and Coverage

PACKING: Available in 200 ml, 1,5,10 & 100 ltr.
COVERAGE: 16 ltr of emulsified will cover approx 4000 to 4200 Sq.Ft on steel surface.
.

Shelf Life

The product has shelf life of 12 months if stored under shaded condition.
.

For specialty products consult the authorized representative of the company before its usage & application. Any failures resulting prior to proper guidance from our representative or application carried out by the other applicators that are not authorized by us, will not be our responsibility.