MOULDRELEASE - SR
MOULDRELEASE AGENT CUM SURFACE RETARDER

Introduction

Mould Release SR is latest blend of mould release agent with latest compliance of V.O.C issued by American Standard for testing material. It is a special formulated blend of mineral oils & chemicals, which gives easy mould release, & retardation of the top 5 mm concrete on the steel plates. This unique properly of the product has its importance for plasters without harming the concrete layer. The retarder will produce a retardation of the top surface layer adjoing the mould & the processed mineral oil will help demoulding the shutters easily.

PHYSICAL PROPERTIES:
1) Colour: Pale
(2) Specific Gravity: 1.06 at 30°C.
(3) Application temperature 5°C to 45°C.
(4) Applicable on all types of mould.
.

Benefits

1) Economical mould release agent with environment friendly product.
2) Gives astheic look to the concrete surface, when exposed aggregate finish is required.
3) Provides good mechanical keys for plastering with chiseling & other traditional means, which affect the soundness of the concrete surface.
4) Increased mould life due to easy deshuttering..

Application Guidelines

1) Clean the mould before application; no lumps dirt should be there on the surface.
2) Apply mould release- SR by cloth sponge or brush.
3) Only one coat is sufficient.
.

Packing and Coverage

PACKING: Available in 5 ltr. and 10 ltr. packing sizes.
COVERAGE: Coverage is about 12-15M2 per ltr depending on surface texture & porosity.
.

Shelf Life

The product has shelf life of 12 months if stored under shaded condition.
.

For specialty products consult the authorized representative of the company before its usage & application. Any failures resulting prior to proper guidance from our representative or application carried out by the other applicators that are not authorized by us, will not be our responsibility.